Supply of wooden cot- 8 mm plywood (isi quality)top of size 198 cm length,90 cm width , front leg 60 cm, back leg 50cm (including transporting loading and unloading), study table -shutter using writing pad with drawer and bottom shelves ,made up of good quality board 30"x13"x42" , steel cot- plywood (isi quality) top 8 mm plywood 1 1/4" x 1 1/4" 16 g square pipe leg 60cm , height head side and 50cm height on leg side ,frame 2"x1" 16 g square pipe and 1 1/2" x 3/4 square pipe refittable type with net bolt 194x90 cm. , steel frame bench -18 mm rubwood top and 1" square pipe frame and legs 18g, 180x30x45 cm, steel frame desk- 18 mm rubwood top and 1" square pipe frame and legs 18g , 180x30x45 cm, steel armless chair -rub wood seat 3/4 " pipe , steel armless cushion chair-, plastic chair -arm chair , "supply and installation of aluminum partition ( rate for 1 m square) consisting of aluminum sections 63.5 mm x 38.1 mm x 1.0 mm thick hollow anodized of jindal / hindalco make conforming to is733 and is 1285. the anodizing shall be transparent and complying is 1868 (minimum anodic coating of grade ac 15). the sections would be installed at an interval of 3’6” vertically and bottom section of size 63.5 mm x 38.1 mm x 1.0 mm aluminium snap beading for glazing/panelling etc. and 5 mm thick float transparent glass/mesh including providing screw less aluminium glazing clip. bottom up to 3’ ht will be provided with 8 mm thick both side pre-laminated particle board flat pressed 3 layer conforming to is12823 grade i type ii of of interior grade complete with fixing clips, fasteners, filling up of gaps at junction, top, bottom,& sides with required pvc/neoprene felt etc.. the joints shall be smooth, mitred and jointed with cleat angle etc, ", wall panneling with hard wooden pannel rate for1m² paneling wall using mahagony wooden panel of size between 20 cm and 25 cm wide and 15mm thick, over hard wood or anjili wood reapers spaced at 50cm c/c and fixed to walls by fiber plug and screws and decoratively designed panels, fixed over reapers already fixed using, star screws etc... and polishing with best quality polish two coats including all cost and labour charge etc., office wall rack mdf rate for1m² setting up of office wall rack by using good quality 18mm both side prelaminated mdf & 15mm both side prelaminated mdf with doors, including steel handle ,multi lock and auto hinges etc, office wall rack mdf rate for1m² setting up of office wall rack by using good quality 18/15/25 mm (combined )both side prelaminated mdf with doors, including steel handle ,multi lock and auto hinges etc, office wall rack particle board rate for1m² setting up of office wall rack by using good quality 15/18/25 mm(combined) prelaminated particleboard with doors including , steel handle ,multi lock and auto hinges etc, office cupboard ply wood rate for1m² setting up of office cupboard by using good quality 15/18/25 mm (combined) plywood with 1mm mica laminated finish with door including , steel handle ,multi lock and auto hinges etc complte , office cupboard rubwood rate for1m² setting up of office cupboard by using good quality 15/18/25 mm (combined ) rubwood polished finish with door including , steel handle ,multi lock and auto hinges etc, office cupboard hdf rate for1m² setting up of office cupboard by using good quality 15/18/25 mm (combined) both side prelaminated hdf with doors, including steel handle ,multi lock and auto hinges etc, ceo office chair-executive high back revolving chair with multifunction mechanism, cushioned seat and cushioned/netted back., semi executive office chair-executive high back revolving chair with multifunction mechanism, cushioned seat and cushioned/netted back., medium back office chair-medium back revolving chair with single funchion mechanism, cushioned seat and cushioned/netted back., s type visitors chair with cushioned seat and netted/cushioned back, executive visitors chair with cushioned seat and netted/cushioned back, steel table with prelaminated board top ,1 cuboard with inner shelves- 22 g, ceiling with pvc pannel ( (rate for 1m² ) providing false ceiling using pvc panel 30cm wide and 3.66m long (12ft.) over 20 x 20mm aluminium tube hanged on to roof slab or members, with gi wire or aluminium glazing clips, and providing pvc decoration corners, and pvc h section for extending the length etc. including necessary screws, labour charges etc.. complete., false ceiling(plain) - gypsum board 12.45.1 providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from m.s.sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per is 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate g.i. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to g.i. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long g.i. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws 230 mm interval. , painting painting –emulsion - 13.60.1 wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade two coat putty,one coat cement prime and two coat painting after cleaning the surface.
Supply of wooden cot- 8 mm plywood (isi quality)top of size 198 cm length,90 cm width , front leg 60 cm, back leg 50cm (including transporting loading and unloading), study table -shutter using writing pad with drawer and bottom shelves ,made up of good quality board 30"x13"x42" , steel cot-
Bed Tenders, Benches Tenders, Cabinet Tenders, Chair Tenders, False Ceiling Tenders, Furniture Tenders, Loading Work Tenders, Painting Work Tenders, Rack Tenders, Table Tenders, Transportation Work Tenders, Wall Tenders