1.
Kerala Tenders
Biz value: INR 5.67 Cr
Bid Before:28 May 20223 Days to go |
Village Panchayat |
Supply of material supply of various mgnregs works - quarry waste, stone aggregate(single size) 40 mm nominal size, stone aggregate(single size)20 mm nominal size, stone aggregate(single size) 10 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, coir pith compost, foundations,footings, bases of columns, ect for mass concrete , stone for masonry work, fine sand (zone iv), interlocking c.c. paver block (80 mm thick, m-30), stone aggregate(single size) 06 mm nominal size, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable span eso+si (2.35-3.40), adjustable telescopic prop 3 m (2.02-3.75m), stone aggregate(single size) 10 mm nominal size, twisted steel/deformed bars, through and bond stone size 24 x 24 x 39cm, adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), solid blocks of size 30x20x20cm, average rate of mild steel round bars for reinforcements, stone aggregate(single size) 06 mm nominal size, mild steel round bar 12 mm dia and below, flats up to 10 mm in thickness, mild steel round bar above 12 mm dia, hollock wood in planks, kiln seasoning of timber, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 50x37x1.50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, mild steel tubes hot finished welded type, welding by electric plant, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, galvanised steel j or l hooks 8 mm dia, bitumen washer, g.i. plain washer thick, precoated aluminium trafford sheet 0.450mm thick, polyethylene water storage tank with cover and suitable locking arrangemnet, vitreous china flat back wash basin 630x450 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, pvc pipe 15 mm outer dia. 12kgf/cm2, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, water proofing cement paint, galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm, wire nails, epoxy paint, hollow blocks of size 40x20x20cm, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, vitreous china flat back wash basin 630x450 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., pvc pipe 15 mm outer dia 10kgf/cm2, pvc pipe 25 mm outer dia . 12 kgf/cm2, pvc pipe 110 mm outer dia 6kgf/cm2, factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile, deharadun white lime, pink primer (for wood), solid blocks of size 30x20x15cm, mild steel tubes hot finished welded type, pvc pipe 63 mm outer dia. 4 kgf/cm2, pvc pipe 50 mm outer dia.6kgf/cm2, aracanut post, gi trafford profile sheet 0.35mm thick, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, second class kail wood in planks, second class kail wood in scantling, safeda ballies 125 mm diameter, pvc pipe 40 mm outer dia. 6kgf/cm2, pvc pipe 63 mm outer dia . 6kgf/cm2, g.i pipes 50 mm dia, g.i. pipes 40 mm dia, pvc pipe 25 mm outer dia. 10kgf cm2, anjili wood scantls, galvanised steel corrugated sheets. |
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
2.
Tamil Nadu Tenders
Biz value: INR 22.32 Lac
Bid Before:25 May 2022Closing today |
Tamil Nadu Electricity Board |
Supply, fabrication, sand blasting & zinc painting of rs Joist, MS Channels, MS Plate, supply of MS Flat, and erection of structure, earth raiser, erection of 110 KV & 33 kv breakers, CT's, AB Switches, providing droppers, jumpers, laying of cables & end terminations & etc., for enhancement of the existing 110/33 - KV Power transformer capacity from 1 x 25mva to 2x25mva at puduthangal 110/33 - 11kv ss. |
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
3.
Madhya Pradesh Tenders
Biz value: INR 20 Lac
Bid Before:06 June 202212 Days to go |
Urban Administration And Development |
Purchasing material - submersible motor pump for use in 200mm dia borewell(tubewell), three phase 415volt line-to-line, 50hz frequency, motor rating 3.73 kilowatt/05 horsepower, discharge head- 100m/328.08foot or high, number of stages 08 or more, for handling of clear,cold,drinkable water, conforming to is8034 and is9283, bee energy star rating- 3star or more, bis certified make, popular make- waterman,rockwell,kirloskar,duke plasto, lubi, uom- each, submersible motor pump for use in 200mm dia borewell(tubewell), three phase 415volt line-to-line, 50hz frequency, motor rating 7.4 kilowatt/10 horsepower, discharge head- 120 m/393.7 foot or high, number of stages 08 or more, for handling of clear,cold,drinkable water, conforming to is8034 and is9283, bee energy star rating- 3star or more, bis certified make, popular make- waterman,rockwell,kirloskar,duke plasto, lubi, uom- each, submersible motor pump for use in 200mm dia borewell(tubewell), three phase 415volt line-to-line, 50hz frequency, motor rating 9.3 kilowatt/12.5 horsepower, discharge head- 120 m/393.7 foot or high, number of stages 12 or more, for handling of clear,cold,drinkable water, conforming to is8034 and is9283, bee energy star rating- 3star or more, bis certified make, popular make- waterman,rockwell,kirloskar,duke plasto, lubi, uom- each, submersible motor pump for use in 200mm dia borewell(tubewell), three phase 415volt line-to-line, 50hz frequency, motor rating 11.19 kilowatt/15 horsepower, discharge head- 120 m/393.7 foot or high, number of stages 12 or more, for handling of clear,cold,drinkable water, conforming to is8034 and is9283, bee energy star rating- 3star or more, bis certified make, popular make- waterman,rockwell,kirloskar,duke plasto, lubi. uom- each, submersible motor pump for use in openwell, three phase 415volt line-to-line, 50hz frequency, motor rating 14.9 kilowatt/20 horsepower, discharge head- 100 m/328.08 foot or high, number of stages 08 or more, for handling of clear,cold,drinkable water, conforming to is142201994 reaffirmed 2009, bee energy star rating- 3star or more, bis certified make, popular make- waterman,rockwell,kirloskar,duke plasto, lubi, uom- each, kirloskar diesel engine-water-pump,complete unit including water pump and engine, for handling of clear,cold,drinkable water, conforming to is115011986 reaffirmed 2016, bis certified make, popular make- kirloskar, engine power rating- 05 horsepower, uom- each, kirloskar diesel engine-water-pump,complete unit including water pump and engine, for handling of clear,cold,drinkable water, conforming to beaureu of indian standard , bis certified make, popular make- kirloskar, engine power rating- 08 horsepower, uom- each, mnoblock motor pump for use in openwell, three phase 415volt line-to-line, 50hz frequency, motor rating 07.46 kilowatt/10 horsepower, discharge head- 100 m/328.08 foot or high, number of stages 08 or more, for handling of clear,cold,drinkable water, conforming to is142201994 reaffirmed 2009, bee energy star rating- 3star or more, bis certified make, popular make- kirloskar, texmo,havells, uom- each, rotodyanamic self priming motor coupled pump, special purpose pump in compliance to is5120 latest, centrifugal pump for handling various types of liquids other than clear, cold and fresh water,handling chemicals, effluents,sewage,ash water. for usage in dewatering of foundation, trenches, and pits. flood water handling. pumping water from docks, ports, vessels. dewatering from basements,multi-storeys,shopping malls, godowns. suction pipe size- 100mm, delivery size- 100mm, size(diameter) of solids in liquid to be handled -23mm, motor rating - 9.3kilowatt/12.5 horsepower, motor type- three phase ac motor 415 volt, 50hz, degree of ingress protection - ip-55, uom- each, riser pipes with socket for submersible pumps, having diameter equal to diamer - 50mm/2inch, conforming to is 1239(part1)2004 with up-to-date amendments, lengh of one unit of pipe 10 foot/ 3meter , screwed at both ends as per is 554 latest and isi marked socketed as per is 1239(part2)/1992 reaffirmed 2002 at one end and other end protected with plastic protector, hot dipped galavnised zinc coating on the tubes shall be in accordance with is 4736, category of steel tubes- blue for medium tubes, bis certified make, popular make- tata, jindal, uom- each, rigid upvc pipes for supply of potable water for public consumption, as per is 49852000 latest, one end socketed and other end plain such that the two pipes could be joined with the help of solvent cement, bis certified make, lengh of one unit of pipe 20foot/6meter nominal outside diameter- 63mm, pressure nominal- 0.60mpa/6.0 kg per square centimeter, uom- each, rigid upvc pipes for supply of potable water for public consumption, as per is 49852000 latest, one end socketed and other end plain such that the two pipes could be joined with the help of solvent cement, bis certified make, lengh of one unit of pipe 20foot/6mete... |
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
|
|
|
7.
West Bengal Tenders
Biz value: Refer Document
Bid Before:27 May 20222 Days to go |
District Magistrate |
Supply of different type construction related materials - stone aggregate(single size) 40 mm nominal size, stone aggregate(single size)25 mm nominal size, stone aggregate(single size)20 mm nominal size, stone aggregate(single size) 12.5 mm nominal size, stone aggregate(single size) 10 mm nominal size, stone aggregate(single size)63 mm nominal size, stone aggregate(single size)50 mm nominal size, stone aggregate (single size)06 mm nominal size, laterite boulder, cowdung, portland cement, white cement , ready mixed pink or grey primer on wood work(hard and softwood) having voc content less than 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, cement primer , pink primer (for wood), white cement based putty , brick bats, moorum, synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, wire mesh (rabbit), g.i. plain washer for seam bolts, water proofing materials, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia , g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel plain sheets, galvanished steel bolts & nuts 10 mm dia and 125 mm long round head with slots, mild steel bolts 6 mm dia and 25 mm long with hexagonal head , seam bolts and nuts 6 mm dia and 25 mm long, g i wire, g.i limpet washer, bitumen washer , unslaked lime, glue , green or blue medium shade pigment , galvanised steel j or l hooks 8 mm dia, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, galvanised steel turn buckles, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcements, twisted steel/deformed bars, structural steel such as tees, angles, channels and r.s. joists , flats up to 10 mm in thickness, flats exceeding 10 mm in thickness, mild steel plates, galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded with 4 galvanised steel nuts, bolts and nuts up to 300 mm in length, bolts and nuts above 300 mm in length, stone for masonry work, stone for pitching 15 cm x 22.5 cm, stone dust, stone grit 6 mm and down size or pea sized gravel, hire charges of diesel road roller- 8 to 10 tonne, vibrator (needle type 40 mm), pin vibrator, surface vibrator, water tanker 5000 ltr. capacity, hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, stone screening type a (13.2 mm), stone screening type b (11.2mm) , 1st class picked jhama bricks(traditional), stone boulder( 225 mm above ), stone boulder ( 225mm-150mm ) , fine sand, medium sand, coarse sand, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 600, 700, 750 & 800 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 900 mm dia, loading, unloading and stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced) cement pipes 1000, 1100 & 1200 mm dia, loading, unloading and stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced) cement pipes 1400 & 1800 mm dia, bamboo (8cm-10cm dia) including fixing, wire nails, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings , hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, loading unloading & stacking sand/ stone aggregate (less than 40mm nominal size), loading unloading & stacking stone aggregate (above 40mm nominal size), loading unloading & stacking lime, moorum, building rubish and similar miscellaneous material, 1st class traditional bricks (kiln burnt), modular clay bricks, tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is 1786), tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is 1786), tor steel rods/hysd bars/tmt bars (sail/tata/rinl) (fe415/fe500/fe500d conforms to is 1786), galvanished steel barbed wire, mild steel tubes hot finished seamless type, loading, unloading and stacking by manual means of steel , r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area, gi pipe 32 mm dia medium quality for underground works, thermocol 12.5 mm thick., structural members of specified sections weighing less than -22.5 kg./m (e.g. joists, angle, channel sections conforming to is 226, is 808 & sp (6)- 1964), structural works in roof trusses etc. using joists, channels and angles of specified section (conforming to is 226, is 808 & sp (6)- 1964) weighing less than 22.5 kg/ m , m.s. structural works in roof trusses with tubular sections conforming to is ... |
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
8.
West Bengal Tenders
Biz value: Refer Document
Bid Before:27 May 20222 Days to go |
District Magistrate |
Supply of different type construction related materials - stone aggregate(single size) 40 mm nominal size, stone aggregate(single size)25 mm nominal size, stone aggregate(single size)20 mm nominal size, stone aggregate(single size) 12.5 mm nominal size, stone aggregate(single size) 10 mm nominal size, stone aggregate(single size)63 mm nominal size, stone aggregate(single size)50 mm nominal size, stone aggregate (single size)06 mm nominal size, laterite boulder, cowdung, portland cement, white cement , ready mixed pink or grey primer on wood work(hard and softwood) having voc content less than 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, cement primer , pink primer (for wood), white cement based putty , brick bats, moorum, synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, wire mesh (rabbit), g.i. plain washer for seam bolts, water proofing materials, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia , g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel plain sheets, galvanished steel bolts & nuts 10 mm dia and 125 mm long round head with slots, mild steel bolts 6 mm dia and 25 mm long with hexagonal head , seam bolts and nuts 6 mm dia and 25 mm long, g i wire, g.i limpet washer, bitumen washer , unslaked lime, glue , green or blue medium shade pigment , galvanised steel j or l hooks 8 mm dia, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, galvanised steel turn buckles, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcements, twisted steel/deformed bars, structural steel such as tees, angles, channels and r.s. joists , flats up to 10 mm in thickness, flats exceeding 10 mm in thickness, mild steel plates, galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded with 4 galvanised steel nuts, bolts and nuts up to 300 mm in length, bolts and nuts above 300 mm in length, stone for masonry work, stone for pitching 15 cm x 22.5 cm, stone dust, stone grit 6 mm and down size or pea sized gravel, hire charges of diesel road roller- 8 to 10 tonne, vibrator (needle type 40 mm), pin vibrator, surface vibrator, water tanker 5000 ltr. capacity, hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, stone screening type a (13.2 mm), stone screening type b (11.2mm) , 1st class picked jhama bricks(traditional), stone boulder( 225 mm above ), stone boulder ( 225mm-150mm ) , fine sand, medium sand, coarse sand, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 600, 700, 750 & 800 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 900 mm dia, loading, unloading and stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced) cement pipes 1000, 1100 & 1200 mm dia, loading, unloading and stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced) cement pipes 1400 & 1800 mm dia, bamboo (8cm-10cm dia) including fixing, wire nails, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings , hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, loading unloading & stacking sand/ stone aggregate (less than 40mm nominal size), loading unloading & stacking stone aggregate (above 40mm nominal size), loading unloading & stacking lime, moorum, building rubish and similar miscellaneous material, 1st class traditional bricks (kiln burnt), modular clay bricks, tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is 1786), tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is 1786), tor steel rods/hysd bars/tmt bars (sail/tata/rinl) (fe415/fe500/fe500d conforms to is 1786), galvanished steel barbed wire, mild steel tubes hot finished seamless type, loading, unloading and stacking by manual means of steel , r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area, gi pipe 32 mm dia medium quality for underground works, thermocol 12.5 mm thick., structural members of specified sections weighing less than -22.5 kg./m (e.g. joists, angle, channel sections conforming to is 226, is 808 & sp (6)- 1964), structural works in roof trusses etc. using joists, channels and angles of specified section (conforming to is 226, is 808 & sp (6)- 1964) weighing less than 22.5 kg/ m , m.s. structural works in roof trusses with tubular sections conforming to is ... |
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
9.
West Bengal Tenders
Biz value: Refer Document
Bid Before:27 May 20222 Days to go |
District Magistrate |
Supply of different type construction related materials - stone aggregate(single size) 40 mm nominal size, stone aggregate(single size)25 mm nominal size, stone aggregate(single size)20 mm nominal size, stone aggregate(single size) 12.5 mm nominal size, stone aggregate(single size) 10 mm nominal size, stone aggregate(single size)63 mm nominal size, stone aggregate(single size)50 mm nominal size, stone aggregate (single size)06 mm nominal size, laterite boulder, cowdung, portland cement, white cement , ready mixed pink or grey primer on wood work(hard and softwood) having voc content less than 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, cement primer , pink primer (for wood), white cement based putty , brick bats, moorum, synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, wire mesh (rabbit), g.i. plain washer for seam bolts, water proofing materials, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia , g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel plain sheets, galvanished steel bolts & nuts 10 mm dia and 125 mm long round head with slots, mild steel bolts 6 mm dia and 25 mm long with hexagonal head , seam bolts and nuts 6 mm dia and 25 mm long, g i wire, g.i limpet washer, bitumen washer , unslaked lime, glue , green or blue medium shade pigment , galvanised steel j or l hooks 8 mm dia, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, galvanised steel turn buckles, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcements, twisted steel/deformed bars, structural steel such as tees, angles, channels and r.s. joists , flats up to 10 mm in thickness, flats exceeding 10 mm in thickness, mild steel plates, galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded with 4 galvanised steel nuts, bolts and nuts up to 300 mm in length, bolts and nuts above 300 mm in length, stone for masonry work, stone for pitching 15 cm x 22.5 cm, stone dust, stone grit 6 mm and down size or pea sized gravel, hire charges of diesel road roller- 8 to 10 tonne, vibrator (needle type 40 mm), pin vibrator, surface vibrator, water tanker 5000 ltr. capacity, hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, stone screening type a (13.2 mm), stone screening type b (11.2mm) , 1st class picked jhama bricks(traditional), stone boulder( 225 mm above ), stone boulder ( 225mm-150mm ) , fine sand, medium sand, coarse sand, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 600, 700, 750 & 800 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 900 mm dia, loading, unloading and stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced) cement pipes 1000, 1100 & 1200 mm dia, loading, unloading and stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced) cement pipes 1400 & 1800 mm dia, bamboo (8cm-10cm dia) including fixing, wire nails, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings , hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, loading unloading & stacking sand/ stone aggregate (less than 40mm nominal size), loading unloading & stacking stone aggregate (above 40mm nominal size), loading unloading & stacking lime, moorum, building rubish and similar miscellaneous material, 1st class traditional bricks (kiln burnt), modular clay bricks, tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is 1786), tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is 1786), tor steel rods/hysd bars/tmt bars (sail/tata/rinl) (fe415/fe500/fe500d conforms to is 1786), galvanished steel barbed wire, mild steel tubes hot finished seamless type, loading, unloading and stacking by manual means of steel , r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area, gi pipe 32 mm dia medium quality for underground works, thermocol 12.5 mm thick., structural members of specified sections weighing less than -22.5 kg./m (e.g. joists, angle, channel sections conforming to is 226, is 808 & sp (6)- 1964), structural works in roof trusses etc. using joists, channels and angles of specified section (conforming to is 226, is 808 & sp (6)- 1964) weighing less than 22.5 kg/ m , m.s. structural works in roof trusses with tubular sections conforming to is ... |
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
10.
West Bengal Tenders
Biz value: Refer Document
Bid Before:27 May 20222 Days to go |
District Magistrate |
Supply of different type construction related materials - stone aggregate(single size) 40 mm nominal size, stone aggregate(single size)25 mm nominal size, stone aggregate(single size)20 mm nominal size, stone aggregate(single size) 12.5 mm nominal size, stone aggregate(single size) 10 mm nominal size, stone aggregate(single size)63 mm nominal size, stone aggregate(single size)50 mm nominal size, stone aggregate (single size)06 mm nominal size, laterite boulder, cowdung, portland cement, white cement , ready mixed pink or grey primer on wood work(hard and softwood) having voc content less than 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, cement primer , pink primer (for wood), white cement based putty , brick bats, moorum, synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, wire mesh (rabbit), g.i. plain washer for seam bolts, water proofing materials, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia , g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel plain sheets, galvanished steel bolts & nuts 10 mm dia and 125 mm long round head with slots, mild steel bolts 6 mm dia and 25 mm long with hexagonal head , seam bolts and nuts 6 mm dia and 25 mm long, g i wire, g.i limpet washer, bitumen washer , unslaked lime, glue , green or blue medium shade pigment , galvanised steel j or l hooks 8 mm dia, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, galvanised steel turn buckles, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcements, twisted steel/deformed bars, structural steel such as tees, angles, channels and r.s. joists , flats up to 10 mm in thickness, flats exceeding 10 mm in thickness, mild steel plates, galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded with 4 galvanised steel nuts, bolts and nuts up to 300 mm in length, bolts and nuts above 300 mm in length, stone for masonry work, stone for pitching 15 cm x 22.5 cm, stone dust, stone grit 6 mm and down size or pea sized gravel, hire charges of diesel road roller- 8 to 10 tonne, vibrator (needle type 40 mm), pin vibrator, surface vibrator, water tanker 5000 ltr. capacity, hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, stone screening type a (13.2 mm), stone screening type b (11.2mm) , 1st class picked jhama bricks(traditional), stone boulder( 225 mm above ), stone boulder ( 225mm-150mm ) , fine sand, medium sand, coarse sand, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 600, 700, 750 & 800 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 900 mm dia, loading, unloading and stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced) cement pipes 1000, 1100 & 1200 mm dia, loading, unloading and stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced) cement pipes 1400 & 1800 mm dia, bamboo (8cm-10cm dia) including fixing, wire nails, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings , hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, loading unloading & stacking sand/ stone aggregate (less than 40mm nominal size), loading unloading & stacking stone aggregate (above 40mm nominal size), loading unloading & stacking lime, moorum, building rubish and similar miscellaneous material, 1st class traditional bricks (kiln burnt), modular clay bricks, tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is 1786), tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is 1786), tor steel rods/hysd bars/tmt bars (sail/tata/rinl) (fe415/fe500/fe500d conforms to is 1786), galvanished steel barbed wire, mild steel tubes hot finished seamless type, loading, unloading and stacking by manual means of steel , r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area, gi pipe 32 mm dia medium quality for underground works, thermocol 12.5 mm thick., structural members of specified sections weighing less than -22.5 kg./m (e.g. joists, angle, channel sections conforming to is 226, is 808 & sp (6)- 1964), structural works in roof trusses etc. using joists, channels and angles of specified section (conforming to is 226, is 808 & sp (6)- 1964) weighing less than 22.5 kg/ m , m.s. structural works in roof trusses with tubular sections conforming to is ... |
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|