|
1.
Delhi Tenders
Biz value: INR 38.13 Cr
Bid Before:27 January 20211 Day to go |
| Water And Power Consultancy Services Indian Limited |
| Procurement, supply and commissioning of 04 nos. heavy duty direct circulation rotary rigs of 500 meter well construction capacity drill pipes of nc 50 tool joints (4½” if) of size 127mm (5”), external upset, grade e. range one 6.1 m (20 feet) long, weight 24.7 kg/m with steel thread protectors., drill pipes 88.9 mm (3.5 in), nc 38 if tool joints, external upset, grade e, ranqe one 6.1 m (20 feet) lonq, weight 19.8 kg/m with steel thread protectors., triple sheave travelling block with single latching hook, capacity not less than 500 kn, 152 mm (6 in) x 7.50 m (25 ft) long suction hose with fittings, strainer, and foot valve, 76.2 mm (3 in) x 10 m (33 ft) long high pressure wire braided swivel hose complete with fittings and mud mixing gun., drill collars made of aisi 4145 h chromium molybdenum alloy steel and are fully heat treated to a brinell hardness range of 285-341 of size 203.2 mm x 6.1m (8 in x 20 ft), 167.3 mm (6-5/8 in) rh reg threads with steel thread protectors, drill collars made of aisi 4145 h chromium molybdenum alloy steel and are fully heat treated to a brinell hardness range of 285-341 of size 158.8 mm x 6.1m (6-1/4 in x 20 ft), 88.9 mm (4½ in) rh reg threads with steel thread protectors, kelly saver sub box to pin (4½" if) made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341 (each size drill pipe - 2 nos), box (4½” if rh) to pin (3½ if rh) sub for kelly saver to 88.9mm drill pipe, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341. length approximately 75cm., box (4 ½” if rh) to pin (4½” if rh)sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341. length approximately 75m., box (4½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 203.2mm drill collar, made of aisi 4140/4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, pin (4½” reg rh) to box (4½" reg rh) sub made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, pin (6 5/8” reg rh) to box (6 5/8” reg rh) sub made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3½” if rh) to pin (4½” if rh) sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 203.2mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, sub for attaching fishing tools (si. no 79 to 87) with 88.9mm drill pipe (one set will contain two number of subs for each different size to fishing tools joints), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4 ½" reg rh connection) x box (4 ½” reg rh) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box (4 ½” reg rh connection) x box (6 5/8” reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box (4 ½” reg rh connection) x box (7 5/8” reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box 6 5/8” reg rh connection to box 3 ½” if, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box 6 5/8” reg rh connection to box ( 6 5/8" reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box 6 5/8” reg rh conne |
|
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
|
2.
Madhya Pradesh Tenders
Biz value: INR 29.31 Lac
Bid Before:27 January 20211 Day to go |
| Madhya Pradesh Power Generation Company Limited |
| Supply of spares of transport air compressor (make-kirloskar) model t-btd-rm of mill reject handling system installed at 2x660 mw, sstpp, mppgcl, dongalia - crankshaft, brg lock, packing, packing *, brg bush pl halves std br thin, brg bush pl halves std br thin\, oil scrapper, screw grub m6x1x8l, seal oil 130.00x114.00x11, thrust washer, cylindrical pin dia 5.00x10l, rubber packing, sight glass, distance piece assly, packing for distence piece, distance piece cover, packing *o, oil stopper, packing *__, oil wiper ring, garter spring, oil wipper ring case cover, packing, crosshead assly, cross head & shoe assly, cross head bush, gudgeon pin, gudgeon pin cover, packing *_, screw hex std m10x1.5x22l, connecting rod assly, connecting rod assly, bolt con rod m24 x2 x drg, washer tab steel 25 x 1.2, small end bush, brg bush pl halves std br thin, gland packing assly, gland packing assly., packing box, assly of 3piece packing with gs-rad ial, assly of 3 piece packing with gs-ta ngent, garter spring, pressure breaker, screw hex std m10x1.5x25l, lp cylinder assly 470 dia, stud std type b m20x2.5x125l, nut hex m20x2.5, packing, packing - for inner router, blind plate, packing, stud std type b m16x2x74l e, nut hex m16x2, bolt sq hd m20x2.5xdrg, blind nut m20 x 2.5, screw hex std m10x1.5x25l, hp cylinder 290 dia, stud std type b m16x2x109l, nut hex m16x2, packing (swipper), water jacket cover, packing (for jacket cover), stud std type b m12x1.75x58l, nut hex m12x1.75, blind plate, packing, lp piston assly, piston,piston rod assly with rings, l p piston rod, piston washer, nut hex hd m40 x 1.5, screw grub m8x1.25x20l, compression ring, wear ring, nut m45x1.5, washer lock steel 46x2, seal ring assly, hp piston assly, piston,piston rod assly with ring, hp piston rod, nut hex hd m40 x 1.5, screw grub m8x1.25x20l, compression ring, wear ring hp, washer lock steel 46x2, nut m45x1.5, seal ring assly, lp suction valve, l p piston unloader, piston ring, o ring nitr - x1.484"x0.139 "xc, valve suction, valve suction, valve plate, lift washer, damper plate, spring helical comp 00.60 dia b, bolt special m16x1.5xdrg, locating pin 3.8x16l, unloader fork assly, hub, guide bush, washer plain steel 16x2.8, nut m16x1.5, spring helical comp 04.00 dia b, unloader cover, bush, o ring sili - x174.30x5.700 0xc, lp delivery valve, valve delivery, valve seat, valve guard, valve plate, lift washer, damper plate, spring helical comp 01.00 dia b, nut m16x1.5, bolt special m16x1.5xdrg, packing, hp suction valve, valve suction, valve seat_, valve guard_, valve plate, cushion plate , spring helical comp 00.65 dia a, lift washer__, cylindrical pin dia4x12l, nut castle , split pin dia 3.2x22 l, circlip, valve pusher ch, valve pusher_, hub, bush, spring helical comp 02.00 dia a, cylinder decompressor 35 dia / ss /, piston decompressor 35d / en-56 /, screw hex hd, ring o 29 idx3.5d / silicon rubber / ha, stud m12x1.75x25l, nut hex m12x1.75, valve holder- suction, packing valve for hp suct/dely, sealing ring ch, spring helical comp 00.65 dia a, valve cover 155 dia with hole, hp delivery valve, valve holder- delivery, packing valve for hp suct/dely, sealing ring ch, valve delivery, valve seat__, valve guard__, valve plate, cushion plate , spring helical comp 00.70 dia b, valve cover 155 dia with out hole, gear pump assly, gear pump assly, packing _, seal oil type x130x20x7, bush, one way clutch assly, spacer, oil filter assly, oil filter assly, sealing joint, oil regulating valve assly, sealing joint, filter element, oil sealing ring, suction filter and breather, air filter element assly, gasket rubber, breather assly, fly wheel, key, adapter sleeve assly, bearing ball deep, felt seal sq 8mmx200l, v belt spacesaver spc 4500, lock plate, washer lock steel 105x1.75 skf-mb21, plummer block with bear |
|
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
|
3.
Chhattisgarh Tenders
Biz value: INR 14.64 Lac
Bid Before:03 February 20218 Days to go |
| South Eastern Coalfields Limited |
| Supply of spares, push plate bucket, roll back cylinder, bush, sprocket, hex hd bolt (bolster), wear washer, clutch disc backing plate, dump lever assembly, led lamp for head light 7 w, 12 v, lift arm assemby, link assembly, seal, steering cylinder, twin cooler assembly, incoming plug assembly (eeil) for eimco elecon make lhd 811 |
|
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
|
4.
Uttar Pradesh Tenders
Biz value: INR 14.57 Lac
Bid Before:04 February 20219 Days to go |
| Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited |
Running and breakdown maintenance of esp and repairing/reclamation of spares of esp of unit no. 4&5 of 2x500mw, boiler btps, anpara.
electric hoist of aph, esp, economizer maintenance platform/yard boiler unit no. 4 &5, 2x500mw, btps, anpara.
works of breakdown maintenance of tt, gear boxes, belt feeders, vibro feeders and vibrating screen installed in chp, 3x210mw, atps, anpara.
“annual m&r of a.w.r.s. building of ‘a’, ‘b’ and ‘d’ thermal power station, anpara.
supply of spares of esp system of 3x210mw, atps, anpara.
supply spares of primary & secondary air pre-heater of 2x500mw, btps, anpara.
supply of different specification of idlers for cmr system of 3x210mw, atps, anpara.
“two shift/day operation of 14 ton hydra and jcb robot-135 in atp, anpara.
annual engagement of unskilled worker in permanent filtration plant, anpara thermal power station, anpara.
supply of pinion with taper lock bush for secondary aph (30-vix-2300) of 2x500mw, btps, anpara.
insitu boiler tube coating by hvof technique (high velocity oxygen fuel) during overhauling unit no. 7, 2x500mw, dtps, anpara.
supply of knife edge gate valve for pressurized ash slurry application of 3x210mw, atps, anpara.
work of “insulation/cladding work in ducts, damper & related auxiliaries of boiler maintenance division-2 during overhauling of unit no.7 2x500mw, dtps, anpara.
work of “overhauling of bhel make xrp 1003 bowl mills of unit no. 7 2x500mw, dtps, anpara.
work of loading/unloading and transportation of one nos. 20 mva ht transformer along with drums of transformer oil” from panki tps to anparatps, anpara.
work of providing soil cover on top of disposed ash in low lying area of anpara thermal power station. |
|
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
|
5.
Mizoram Tenders
Biz value: INR 2 Lac
Bid Before:30 January 20214 Days to go |
| Border Road Organisation |
| Supply order of cat a spares part - Fuel filter element, spring bush, assembly shackle, spring pin, assembly tie rod, assembly clutch center bearing bracket, assembly tie rod, tie rod end, oil seal, handle, assembly fuel line, cooler bush, speed gear, ball joint, pivot bush, assembly clutch master cylinder, rubber stopper, first leaf with bushes, second leaf, poly belt. |
|
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
|
6.
Madhya Pradesh Tenders
Biz value: INR 1.27 Lac
Bid Before:29 January 20213 Days to go |
| South Eastern Coalfields Limited |
| Procurement of spares, g.m. bush , pin (frame & cradle), thrust washer , pin assly. part no v19288150, thrust washer part no 8604100, g.m. bush part no. v19280660, grease nipple part no g110, pin part no 8604170, slotted nut part no n7.20x2, pin part no v19360013, pin part no v19360022, stud part no v19300393, strainer part no y0147020, air cylinder part no v19490140, u/l valve part no v19490120, bowl part no v19490471, drain valve part no m302830, repair kit part no msp6/6, slave cylinder part no v16257600, wheel brake assly part no 86029030/86029032, brake assly.(lh) part no 86029010/86029011, brake assly.(rh) part no 86029020/86029021, suction hose part no pp10703, hose clamp part no 416130, pump coupling assly. part no 85339012, hose part no v19450491, hp hose part no v19450481, sealing washer part no 707230, bolt part no b131s3174, bush part no d420190, seal kit part no sdy2216000, winch hose part no v16548040, seal kit for lift cylinder part no sdy2263000, seal kit part no sdy2262000, wire rope part no v19262860, tie bolt part no v19528010, bearing cap part no y0552200, thrust bearing part no 8604180, bearing washer part no 8604060, bush pivot part no y0552190a, gear part no s4009905, seal part no 2415344, seal c/s rear part no 2418f475, fuel cock part no 8379011a, flex pipe part no 411070, over flow pipe part no v19110030, over flow pipe part no y0611010, stop cable part no v19290310/v19290311, pressure plate part no 85189020, clutch plate part no 8518123, bearing part no 518211, ball bearing part no 818020, gear change lever assly. part no v19198040a, change lever housing part no 50011040, gasket kit part no spy2004001, seal kit part no spy2005001, service kit part no spy2403000, hose part no v19160020c, top elbow part no y0516060b for 8 te escort crane at jk area. |
|
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
|
7.
Uttar Pradesh Tenders
Biz value: INR 78 K
Bid Before:05 February 202110 Days to go |
| I T I Limited |
| Supply turned items for ncm - stud lplate& t, plate. itemcodemcct0003, stud pin iti/tr/004,, item codemcct0004, hex stud;, 127mmiti/tr/010/1,, item codemcct0010, hex stud; 73mm, iti/tr/010/2, item, code-mcct0011, hex stud; 52mm, iti/tr/010/3, item, code-mcct0012, hex stud; 34mm, iti/tr/010/4, item, code-mcct0013, damper shaft,, item codemcct0029, cabinet mountn.scr., dia. 8x122 fm, item, code-mcct0030, h0pper, needle,item, code-mcct0031, blower pipe assy.,, item codemcct0032, hex stud; 80mm, iti/tr/010, item, code-mcct0033, bush assembly for, t- plate, item codemcct0045, cam holder, assy.item codemcct0046, weld nut 3/8” item. |
|
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
|
8.
Assam Tenders
Biz value: INR 60 K
Bid Before:27 January 20211 Day to go |
| Border Road Organisation |
| Supply of cat a spares for kirloskar engine all model make kirloskar - 02.022.02.0,injector yock, thrust washer set, inlet & exhaust valve in pairs, bracket for stop switch, v belt switch (suitable for 12v 5ampor24v 2.5a), piston assembly std (with ring set) tc, thrust ring pair drive end , valve pr ( inlet & exhaust), small end bush (s/f) , main brg set std, fuel filter element, fuel filter element pre, set of o rings, rubber hose for drain pipe, assembly of breather pipe with adaptor, lub oil pump sub assy, o ring for nozzle, bush for injector , l.p supply hose (fip). |
|
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
|
|
|
|
