|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9.
Goa Tenders
Biz value: INR 10.49 Cr
Bid Before:06 May 202115 Days to go |
| Electricity Department |
Supply of 11KV, 3 core, 300 sq.mm. aluminium, XLPE insulated, flat wire armoured, 11 KV (Earthed) Cable, type A2XFY conforming I.S. 7098 PART 2 and carrying ISI MARK through conventional open trenching method in any type of soil including hard laterite as per enclosed specifications.
Supply of 11KV, 3 core 185sq.mm aluminium, XLPE insulated, flat wire armoured, 11 KV (Earthed) Cable, type A2XFY conforming I.S. 7098 PART 2 and carrying ISI MARK through conventional open trenching method in any type of soil including hard lateriteas per enclosed specifications.
Supply of 11KV, 630 Amps, Outdoor, SF6 Ring Main Unit with two Load Break Switches and one Circuit Breaker conforming to International Standards and complete with Fault Passage Indicator other accessories as per specifications.
Supply of 11KV, 630 Amps, Outdoor, SF6 Ring Main Unit with three Load Break Switches conforming to International Standards and complete with Fault Passage Indicator other accessories as per specifications.
Supply of 11KV, 3 phase, Outdoor type, heat shrinkable end termination kit complete, for 11 KV XLPE cable of size 3 x 300sq.mm including sockets, lugs, connectors etc. (for 11KV take off gantry at 33 by 11KV sub station and for interlinking with other 11KV Overhead feeders).
Supply of 11KV, 3 phase, Indoor type, heat shrinkable end termination kit complete, for 11 KV XLPE cable of size 3 x 300 sq.mm including sockets,lugs, connectors etc. for connecting RMU for main section side.
Supply of 11KV 3 phase outdoor terminating kit complete, for 11 KV XLPE cable of size 3 x 185 sq.mm including sockets,lugs,connectors etc. for connecting 11KV end of Distribution transformer.
Supply of 11KV 3 phase indoor terminating kit complete, for 11 KV XLPE cable of size 3 x 185 sq.mm including sockets,lugs,connectors etc. for connecting RMU for main section side.
Supply of straight through joint complete for 11 KV XLPE cable of size 3 x 300 sq.mm including sockets,lugs,connectors etc.
Supply of Cable route Markers (for entire 11 KV cable route length ) as per NIT drawing.
Supply and Erection of Warning tape for entire 11 KV route length.
Supply and laying of fine river sand of approved quality for cushioning of HT underground cables laid by conventional Open Trenching Method.
Providing and laying of RCC protective covers of size 600mm long x 250mm width and 50mm thick capable of bearing load of 135 kgs And covered with earth, sand upto a depth of 0.15mtr Confirming to IS 1256-1967 at non road crossing.
Supply and laying of wire cut Bricks for 11KV Cable seperation.
Supply of G.I. earthing pipe, 2500mm long, 40mm nominal dia, class B, perforated for RMUs The pit shall be filled with homogenous mixture of 20Kgs of Charcoal, 20Kgs of salt and sand, soil with Brick masonary Chambers The work includes excavation, backfilling and spreading of excavated surplace earth evenly at RMUs.
Supply of HDGI flat of size 25mm x 5mm for earthing of RMUs.
Providing and laying in position cement concrete 124 (1 cement 2 coarse sand 4 graded granitic or basaltic stone aggregate 40 m nominal size for foundations of RMUs).
Centering and shuttering including struttings, propping etc. and removal of formwork for a) Foundations, footings, bases of columns and mass concrete for RMUs.
12 mm cement plaster 14 ( 1 cement 4 fine sand) for foundations of RMUs.
Supply of RCC Hume Pipe 150mm dia with required no. of collars, for road crossing.
Supply of GI pipe,150mm dia for bridge crossing.
Laying of 11KV, 3 core, 300 sq.mm. aluminium, XLPE insulated, flat wire armoured, 11 KV (Earthed) Cable, type A2XFY conforming I.S.
Laying of 11KV, 3 core 185sq.mm aluminium, XLPE insulated, flat wire armoured, 11 KV (Earthed) Cable, type A2XFY conforming I.S. 7098 PART 2 and carrying ISI MARK through conventional open trenching method in any type of soil including hard lateriteas per enclosed specifications.
Erection of 11KV, 630 Amps, Outdoor, SF6 Ring Main Unit with two Load Break Switches and one Circuit Breaker conforming to International Standards and complete with Fault Passage Indicator other accessories as per specifications.
Erection of 11KV, 630 Amps, Outdoor, SF6 Ring Main Unit with three Load Break Switches conforming to International Standards and complete with Fault Passage Indicator other accessories as per specifications.
Erection of 11KV, 3 phase, Outdoor type, heat shrinkable end termination kit complete, for 11 KV XLPE cable of size 3 x 300sq.mm including sockets, lugs, connectors etc. (for 11KV take off gantry at 33 by 11KV sub station and for interlinking with other 11KV Overhead feeders).
Erection of 11KV, 3 phase, Indoor type, heat shrinkable end termination kit complete, for 11 KV XLPE cable of size 3 x 300 sq.mm including sockets,lugs, connectors etc. for connecting RMU for main section... |
|
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
|
|
